Vintage Tiffany Typewriter Table (makes a great nightstand or side table)
Wednesday, September 28, 2011
Happy 28Day!!
Enjoy the 28th with $5.28 off your Apartment 528 order of $28 or more, today only!! Enter "Happy28" at checkout! Don't forget to checkout out new products below.
Saturday, September 17, 2011
Go Bazaar!
Sorry for the radio silence this past week. We've been getting ready for the Vintage Bazaar! If you're in the Chicago area on Sunday, stop by the Bazaar at the Congress Theater and shop dozens of awesome vintage dealers selling everything from clothing to nightstands all in one great location. Visit the Apartment 528 booth on Rockwell St. to see retro housewares and furniture not yet available on our site.
To sweeten the deal, you can get your hair and makeup did at the mobile makeup and barbershop units, hear tunes spun by Chirp Independent Radio, get your picture taken with your new vintage goodies at the photobooth, and have delicious food and drinks from some of Chicago's yummiest. for more details, visit the Vintage Bazaar website.
To sweeten the deal, you can get your hair and makeup did at the mobile makeup and barbershop units, hear tunes spun by Chirp Independent Radio, get your picture taken with your new vintage goodies at the photobooth, and have delicious food and drinks from some of Chicago's yummiest. for more details, visit the Vintage Bazaar website.
See you there!
Friday, September 9, 2011
The ULTIMATE Weekender: DIY Concrete Countertops
Back in July, my husband and I took on our biggest DIY yet...a kitchen island with a concrete countertop. Concrete is a great material in the kitchen but can be scary for some. Having concrete made and installed by a professional is more expensive than granite. Not only is it cheaper to do it yourself, but it feels awesome knowing you made it yourself. Though it seems like a huge, overwhelming project, it's not!! In fact, we spent more time stressing about and building an island base from scratch that would be strong enough to hold concrete than we did working on the top. As you know, I'm not much for following rules, instead I'm more likely to skip a few steps here and there in an effort to get things done as quickly and easily as possibly. I learned that the hard way that this is DEFINITELY not the project to do that with! For those who want to try their hand at making a concrete counter, I've compiled all the steps you need to make a basic countertop. As I go, I'll give you tips on what to do by telling you what NOT to do. But before we embark on the wonderful journey of mixing concrete, you should have some facts.
LOOK First, concrete is a great material that can be customized in various colors with all kinds of cutouts, textures, and looks. We kept ours pretty basic, only adding die to make the concrete a darker charcoal color. If you want something a little more fancy, do your research before starting so you can learn about the various looks. One resource I found especially helpful was this concrete countertop forum where there are tons of contractors and a few DIYers asking and answering just about every concrete question you can think of. If you're stuck on a particular step or want to get an opinion on the difference between penetrating and topical sealers, these guys and gals can give you first-hand advice. There are several talented pros on the forum sharing pictures of their counters. Browse through and be amazed at all the concrete can do!
SEALING Concrete itself is sturdy and resistant, however you'll have to seal your countertop to keep it free and clear of food stains and liquids. There are all sorts of sealers you can use, none of which are perfect. Some are better at blocking stains, other at resisting heat. I found this website helpful in weighing the pros and cons. Most choose to go with a topical sealer because they're easier to apply and are readily available at home improvement stores. Unfortunately, concrete counters are still relatively new so the market for countertop products is still struggling to catch up. You're not going to find a counter-specific sealer at Home Depot or Lowes. Most people use a basic concrete sealer that can be used for a number of concrete applications, including floors and walls. I can't remember the one we used...we borrowed it from our landlord's nephew and forgot to write down the brand. It was just a basic sealer. If you search online you'll see that a couple of companies, mainly Buddy Rhodes and Cheng, have come out with countertop sealers. Just be warned that they're more expensive. Epoxy is another sealer option but it will give your counters a plastic look which kind of defeats the purpose of using concrete!
Also pay attention to the different finishes of sealer. There's natural-look if you want your counters natural and completely shine free, wet-look which will give the countertops a darker color and slight shine, and glossy if you want a deeper color and bright shine. We didn't want to go shiny but also didn't want to go too dry so we used wet-look. Just a note, sealer typically come in gallons and goes for around $20. If you're doing a whole kitchen, buying a gallon won't seem so horrible, plus you'll have some left over in case you want to recoat again in a year. For our island, we did three coats and only used around 1 cup of sealer.
You'll want to top your sealer off with a coat of wax. The wax doesn't make a good sealer on it's on, but provides a wear layer to prolong the use of your base sealer. You'll have to re-wax about once a month. We chose Johnson's Paste Wax simply because they had it at Home Depot. It has a strong smell to it though so we'll be switching to a more natural beeswax or carnuba wax soon. Note that after awhile, your counters will start to patina and you might get small, hairline cracks. This is natural and doesn't mean that your countertops will break or that there's anything wrong. Just fill any cracks and reseal.
CARE You also have to watch out what you put on your counters. Beware of knives...concrete seems like a solid cutting surface, however it will dull your knife and scratch your sealer. Wipe up acids like lemon and vinegar right after a spill so they don't etch the counter. Don't use bleach or harsh chemicals because it will slowly ruin your sealer. Instead, we use Method's stone cleaner. It smells amazing and keeps things clean! For disinfecting, we use Clorox Anywhere Spray or Green Works which are more gentle than bleach cleaners. Water shouldn't be a problem once the countertop is sealed and waxed. You can set a glass down without it ruining your counters, however if you leave spills on the counter for a prolonged time, it will eventually leave a mark. We set glasses and wet towels directly on the counter all the time and the water marks evaperate after 15 minutes or so. The only things we use coasters for are hot drinks or drinks that are ice cold.
Now that you have the facts, it's time to DIY. This is the longest post I've written so be prepared. Don't worry, it's not that complicated, it just takes care to make the most used surface in your kitchen! I tried to include as many pictures as possible. Hopefully this helps. Enjoy :)
LAZINESS SCALE:
***The following calculations are based on our kitchen island which was 2"deep and approximately 11sq feet
TIME: about 4 days start to finish
COST: about $100 for 11sq ft. Prices go up for larger projects. Cost breakdown below.
BUILD Use the melamine to build your frame(s) to the dimensions of your new countertops. The coating on the melamine will keep the concrete from sticking. The concrete on the bottom of the form is going to be the TOP of your countertop so you want to make sure you have a super smooth surface. If you use regular plywood (not recommended), make sure it's sanded smooth so you don't end up with a texture and use a good release agent. You could try using plastic dropcloth/tarp to line the plywood but if you don't smooth out ALL wrinkles you'll see them in your countertop. Plus the plastic will give your counters a fake, plasticy finish. Make sure your frame is the exact thickness you want your countertop to be. Our countertop and frame were 2" deep. After the frame's built, caulk the edges and corner using 100% silicone caulk. Keep your lines clean...the caulk determines what the edges of your countertop will look like. Let it thoroughly dry. If you're going to make cutouts, now's the time to add the voids. We were planning to include a cutout for a knife holder but forgot so you'll have to find another source for advice on cutouts.
I made the mistake of thinking I could build my form by myself in the short time it took Jerome to mix the concrete. In the end, he had the concrete ready and I was still struggling on the frame. We were trying to finish before our mixer rental ran out, so we ended up adding the concrete before the caulk was dry which led to sticky silicone on the finished concrete. Don't make that mistake!
Once you've got your mix, follow the directions on the bag. This is the easy part! Add your color pigment if desired, following the manufacturer's directions. Save the bottles...the little drops left inside will come in handy later on. Add the concrete to the mixer slowly to get a good, even blend. We mixed 2 bags at a time, per the directions on the mixer. Start off with the least amount of water specified and slowly add more if necessary. We used an old milk jug to make sure we were adding perfect gallons of water. Apparently the final consistency should be thick and creamy like a milkshake or Wendy's Frosty...with rocks in it! Too much water will make the concrete weak. Oh, and don't worry about the rocks...your end result will be smooth. We actually got this part right. Yea us!!
POUR Another easy part, pouring. The mix is heavy so Jerome carried the buckets in for me and poured it into the frame. Use the float to smooth things out as you go. A magnesium float is best because it smooths without digging in, but they're also about $25. Borrow one if you can, or you could just stick with the trowel to save money. Thankfully our landlord had a float so we were good. Keep pouring and smoothing as you go.
REINFORCE Once you get about 3/4 full, add your chicken wire or rebar. We used remesh. Cut your metal so it's about 3/4" away from the edges of the frame so it won't be seen on the finished edges. Continue pouring and smoothing the rest of the concrete. We actually forgot about the remesh and had to push it in once the whole frame was full. Oops!
Once you remove the frame, grab your favorite friends and flip the concrete over to reveal your new, gorgeous countertop!
FILL No matter how well you vibrate out the air holes, your going to have some. Use concrete filler or grout to fill any air holes on the surface. It's easier if you use your finger. If you colored your concrete, add a dab of the pigment to your grout/filler mixture so that it matches the rest of your counter. See, I told you those few drops would come in handy :) I only filled the holes on the top and left the holes on the sides and edges of the top open because I liked the character that they added. Be warned that if you leave holes on the top, they won't seal and will collect food and dust. We've had ours for over a month and haven't had any problems with holes. The ones on the edges of the surface aren't deep and clean up fine with a towel.
SAND Here's where we messed up big time. We got a milky build-up on one part of our concrete (see above pic). According to the forums, this is unpreventable and just happens sometimes. I wiped it up with a wet towel but the stain was still there. You can wash your concrete with an etcher before sealing but I didn't want to spend the money buying a gallon of something I would only use once. Instead I tried vinegar, which I read was an all-natural etcher. I ended up with a streaky mess that was all faded (see above). To make it better, I tried rubbing leftover charcoal coloring on the surface but the streaks stayed. I was terrified that I would end up with a horribly ugly counter. I checked with our landlord's nephew who's a contractor. He's built several bathroom and kitchen counters out of concrete so he knew what he was talking about. He said to scrub the concrete (we used a bathtub scrub brush), wet sand it, spray with water, and then use a squeegee to dry. I gave this a try using 400grit sandpaper for the wet sand and it worked like a charm! As you see in the pictures, there are still some lines because I got to a point where I liked the finish and stopped sanding and spraying.
So what SHOULD you do? Well this depends on the look you're going for. Some people use a grinder with a diamond blade but this will expose the rocky aggregate below the surface. If you like this look, then use the grinder. I wanted a smooth, less grainy surface so I stuck with 400 grit sandpaper. It's as smooth as can be and looks great! I saw that someone else used 80grit on their counter and got a great outcome. It's all up to you. I recommend wet sanding to minimize dust and give you a nice finish. Clean with a wet towel. If you're using a stain or etcher, follow the directions on the package.
PLACE You can either place the counters before or after sealing, it doesn't matter. We did it after. Before placing the countertop in its new home, apply dollops of the silicone caulk to the cabinet top where the concrete is going. The silicone acts like a glue and will keep the countertop in place. The concrete will be HEAVY especially if it's large. It took four strong people (including me of course!) to lift ours. Grab your best friends and remember to lift with your legs...no need for anyone to get hurt!
SEAL As mentioned above, there are several options for sealers and they all have they're own drawbacks. This website has great info on the pros and cons as well as a handy chart. You also have to decide whether you want a wet, glossy, or naturally dry look. We went for wet-look which darkens the color but is less shiny than glossy. We saved $20 here because our landlord's nephew had sealer so we didn't have to buy any. Yea! He recommended spraying the sealer on and smoothing it with a roller. Awesome idea! I put it in a cheap, $2 spray bottle and used a foam roller to smooth. The foam from the spray dissipated on it's own so the foam roller wasn't really necessary but it came in handy few times. I've heard of people only using the roller and ending up with streaks. I definitely suggest spraying!!
WAX When the sealer's dry, apply the wax. Beeswax, carnuba wax, and paste wax are the top three used. We chose paste wax, though it does have a strong smell. The other two are also awesome options, however we couldn't find them at Home Depot and were too lazy to order them online.
There were many awesome websites that helped me along the way. Here are a few:
BEFORE: We were in desperate need of counterspace. We started marking off floor space and got that awesome vintage cabinet from Take 2 Vintage.
AFTER: Our completed island. There's a hidden door next to the stool that gives access to the recycling bin tucked away inside.
LOOK First, concrete is a great material that can be customized in various colors with all kinds of cutouts, textures, and looks. We kept ours pretty basic, only adding die to make the concrete a darker charcoal color. If you want something a little more fancy, do your research before starting so you can learn about the various looks. One resource I found especially helpful was this concrete countertop forum where there are tons of contractors and a few DIYers asking and answering just about every concrete question you can think of. If you're stuck on a particular step or want to get an opinion on the difference between penetrating and topical sealers, these guys and gals can give you first-hand advice. There are several talented pros on the forum sharing pictures of their counters. Browse through and be amazed at all the concrete can do!
We LOVE the natural color variation of our counter. Everyone thinks it's some fancy stone or something! It actually happened by mistake (details below) but now I can't imagine the counters looking any other way. We added charcoal coloring to match the island to our sink.
SEALING Concrete itself is sturdy and resistant, however you'll have to seal your countertop to keep it free and clear of food stains and liquids. There are all sorts of sealers you can use, none of which are perfect. Some are better at blocking stains, other at resisting heat. I found this website helpful in weighing the pros and cons. Most choose to go with a topical sealer because they're easier to apply and are readily available at home improvement stores. Unfortunately, concrete counters are still relatively new so the market for countertop products is still struggling to catch up. You're not going to find a counter-specific sealer at Home Depot or Lowes. Most people use a basic concrete sealer that can be used for a number of concrete applications, including floors and walls. I can't remember the one we used...we borrowed it from our landlord's nephew and forgot to write down the brand. It was just a basic sealer. If you search online you'll see that a couple of companies, mainly Buddy Rhodes and Cheng, have come out with countertop sealers. Just be warned that they're more expensive. Epoxy is another sealer option but it will give your counters a plastic look which kind of defeats the purpose of using concrete!
Also pay attention to the different finishes of sealer. There's natural-look if you want your counters natural and completely shine free, wet-look which will give the countertops a darker color and slight shine, and glossy if you want a deeper color and bright shine. We didn't want to go shiny but also didn't want to go too dry so we used wet-look. Just a note, sealer typically come in gallons and goes for around $20. If you're doing a whole kitchen, buying a gallon won't seem so horrible, plus you'll have some left over in case you want to recoat again in a year. For our island, we did three coats and only used around 1 cup of sealer.
We sealed the top with a wet-look sealer and topped it off with paste wax. It looks shinier in the picture than it does in person. We left the sides natural. The vintage cabinet on the left is from Take 2 Vintage. We built the rest of the island from scratch. The hole in the panel is for throwing things into the recycling bin.
CARE You also have to watch out what you put on your counters. Beware of knives...concrete seems like a solid cutting surface, however it will dull your knife and scratch your sealer. Wipe up acids like lemon and vinegar right after a spill so they don't etch the counter. Don't use bleach or harsh chemicals because it will slowly ruin your sealer. Instead, we use Method's stone cleaner. It smells amazing and keeps things clean! For disinfecting, we use Clorox Anywhere Spray or Green Works which are more gentle than bleach cleaners. Water shouldn't be a problem once the countertop is sealed and waxed. You can set a glass down without it ruining your counters, however if you leave spills on the counter for a prolonged time, it will eventually leave a mark. We set glasses and wet towels directly on the counter all the time and the water marks evaperate after 15 minutes or so. The only things we use coasters for are hot drinks or drinks that are ice cold.
This stuff smells like heaven!
Now that you have the facts, it's time to DIY. This is the longest post I've written so be prepared. Don't worry, it's not that complicated, it just takes care to make the most used surface in your kitchen! I tried to include as many pictures as possible. Hopefully this helps. Enjoy :)
LAZINESS SCALE:TIME: about 4 days start to finish
COST: about $100 for 11sq ft. Prices go up for larger projects. Cost breakdown below.
SUPPLIES:
- 4 bags cement @ $4.77 - $19
- 2 containers of cement color (optional) @ $5.17 - $10.50
- 1 8'x4' sheet of melamine - $36
- Sandpaper (we used 400 grit)
- Sander
- 100% Silicone clear caulk - $5
- Sealer - $18+
- Wax - $7+
- Float/trowel
- Chicken wire/rebar/remesh - $7.50+
- Concrete mixer - rents for $30 for 4hrs from Home Depot
- Grout/concrete filler - $5
BUILD Use the melamine to build your frame(s) to the dimensions of your new countertops. The coating on the melamine will keep the concrete from sticking. The concrete on the bottom of the form is going to be the TOP of your countertop so you want to make sure you have a super smooth surface. If you use regular plywood (not recommended), make sure it's sanded smooth so you don't end up with a texture and use a good release agent. You could try using plastic dropcloth/tarp to line the plywood but if you don't smooth out ALL wrinkles you'll see them in your countertop. Plus the plastic will give your counters a fake, plasticy finish. Make sure your frame is the exact thickness you want your countertop to be. Our countertop and frame were 2" deep. After the frame's built, caulk the edges and corner using 100% silicone caulk. Keep your lines clean...the caulk determines what the edges of your countertop will look like. Let it thoroughly dry. If you're going to make cutouts, now's the time to add the voids. We were planning to include a cutout for a knife holder but forgot so you'll have to find another source for advice on cutouts.
MIX We used Quikrete 5000. We read that most people use regular 80lb Quikrete but once we went to purchase it, one of the guys at Home Depot convinced me that I needed something stronger, especially since the majority of our island was going to be unsupported to room for stools. Afterwards, everyone told us we didn't have to use such a high strength and that we could have used the 80lb. Oh well! There are also several concrete mixes made especially or countertops. Quikrete has one for special order, and people seem to like the Buddy Rhodes mix. It's expensive ($44 PER BAG!!) and can only be ordered online.
 |
| I'm pretty sure every DIY needs Big League Chew! |
 |
| Use the regular 80lb bag. This stuff was stronger than needed. |
Jerome testing the mix. The coloring goes in with it.
The mix should be thick but still flow. Too much water will make your counters weak.
The first pour.
Even though it looks rocky now, you'll end up with a smooth finish in the end.
Here the form is 3/4 full so we should have added the wire here instead of at the end.
Since we added the remesh at the end we had to work hard to push it down beneath the surface.
VIBRATE and SCREED Use your sander (with the sandpaper removed) to go along the outside edges of the frame and vibrate out any air bubbles. You can also use a hammer to tap along the outside but this takes a LOT more work. Once done, use a 2 x 4 or extra melamine piece to screed the excess concrete. What does screed mean? Well, move the 2x4 across the frame in a back and forth sawing motion until the concrete is completely smooth and level. Fill in any gaps as necessary. We got things mixed up and screeded before vibrating so there was tons of concrete spilled over the frame that clogged up the sander. I tried removing air holes with the hammer instead but it was a lot harder than I thought and didn't work as well. Urgh!
TWIDDLE YOUR THUMBS Now you wait. The concrete will start to "sweat" on the surface. Once all the water is absorbed, use your trowel to smooth and level any rough spots. If you want to put your initials or handprints, this is the time. Our concrete didn't need any reworking so we put our handprints, name, and date, then left it alone.
COVER, WAIT, then REMOVE Cover the frame with plastic. We stapled the plastic to the frame to secure it. Wait 24 hours and then remove the frame and plastic. If you read other blogs out there, you'll find that some DIYers waited a week or more before removing the frame because they were nervous about ruining the concrete. This is NOT necessary. Though it takes 28 days for concrete to fully cure, it is ready to use after 1 day. Quikrete, the pro forums, contractors who'd done this before, and even the Buddy Rhodes FAQs confirmed this. Leaving it in the frame longer won't damage the counters, it just doesn't help either, unless you made your mix too watery. Score one for me and my impatience :) We poured our counters on a Sunday and uncovered on Wednesday. We could have taken it out sooner but we were busy building the island frame.
The concrete "sweating"
We put our handprints on the sides (he's on the right, I'm on the left), the date, and "Jindy" our celebrity couple name. Yes, we're geeks!
Once you remove the frame, grab your favorite friends and flip the concrete over to reveal your new, gorgeous countertop!
Here you see our mistakes. Using the hammer to remove the air bubbles instead of a sander left us with lots of air bubbles on the edges. This section of the concrete was the worst. The silicone stuck to the concrete because we didn't let it dry. Still, everything turned out fine in the end!
FILL No matter how well you vibrate out the air holes, your going to have some. Use concrete filler or grout to fill any air holes on the surface. It's easier if you use your finger. If you colored your concrete, add a dab of the pigment to your grout/filler mixture so that it matches the rest of your counter. See, I told you those few drops would come in handy :) I only filled the holes on the top and left the holes on the sides and edges of the top open because I liked the character that they added. Be warned that if you leave holes on the top, they won't seal and will collect food and dust. We've had ours for over a month and haven't had any problems with holes. The ones on the edges of the surface aren't deep and clean up fine with a towel.
The whitish stains on the left side are the milky spots I mention below. The dark spots are excess grout and color tint from filling holes.
SAND Here's where we messed up big time. We got a milky build-up on one part of our concrete (see above pic). According to the forums, this is unpreventable and just happens sometimes. I wiped it up with a wet towel but the stain was still there. You can wash your concrete with an etcher before sealing but I didn't want to spend the money buying a gallon of something I would only use once. Instead I tried vinegar, which I read was an all-natural etcher. I ended up with a streaky mess that was all faded (see above). To make it better, I tried rubbing leftover charcoal coloring on the surface but the streaks stayed. I was terrified that I would end up with a horribly ugly counter. I checked with our landlord's nephew who's a contractor. He's built several bathroom and kitchen counters out of concrete so he knew what he was talking about. He said to scrub the concrete (we used a bathtub scrub brush), wet sand it, spray with water, and then use a squeegee to dry. I gave this a try using 400grit sandpaper for the wet sand and it worked like a charm! As you see in the pictures, there are still some lines because I got to a point where I liked the finish and stopped sanding and spraying.
The various stages of the concrete being fixed. The left side is good. The middle and left have yet to be touched.
So what SHOULD you do? Well this depends on the look you're going for. Some people use a grinder with a diamond blade but this will expose the rocky aggregate below the surface. If you like this look, then use the grinder. I wanted a smooth, less grainy surface so I stuck with 400 grit sandpaper. It's as smooth as can be and looks great! I saw that someone else used 80grit on their counter and got a great outcome. It's all up to you. I recommend wet sanding to minimize dust and give you a nice finish. Clean with a wet towel. If you're using a stain or etcher, follow the directions on the package.
Fixed! We liked the color variations. It looks like a natural stone that was plucked from the earth!
PLACE You can either place the counters before or after sealing, it doesn't matter. We did it after. Before placing the countertop in its new home, apply dollops of the silicone caulk to the cabinet top where the concrete is going. The silicone acts like a glue and will keep the countertop in place. The concrete will be HEAVY especially if it's large. It took four strong people (including me of course!) to lift ours. Grab your best friends and remember to lift with your legs...no need for anyone to get hurt!
SEAL As mentioned above, there are several options for sealers and they all have they're own drawbacks. This website has great info on the pros and cons as well as a handy chart. You also have to decide whether you want a wet, glossy, or naturally dry look. We went for wet-look which darkens the color but is less shiny than glossy. We saved $20 here because our landlord's nephew had sealer so we didn't have to buy any. Yea! He recommended spraying the sealer on and smoothing it with a roller. Awesome idea! I put it in a cheap, $2 spray bottle and used a foam roller to smooth. The foam from the spray dissipated on it's own so the foam roller wasn't really necessary but it came in handy few times. I've heard of people only using the roller and ending up with streaks. I definitely suggest spraying!!
The left is first coated, the middle in progress, and the right not yet done.
First coat done!
Third coat done. We chose not to seal the sides because we liked the contrast. We may go back and seal them one day if we decide the drip marks drive us crazy but for now, we like it.
WAX When the sealer's dry, apply the wax. Beeswax, carnuba wax, and paste wax are the top three used. We chose paste wax, though it does have a strong smell. The other two are also awesome options, however we couldn't find them at Home Depot and were too lazy to order them online.
SMILE You're finally done!! Aren't your new counters awesome? Sit back and enjoy the fruits of your labor :)
- Concrete Countertops Forum - This was the most helpful place. It's full of pros willing to give advice about anything you can think of. 99% of the time, the question you have has already been asked and answered here
- Buddy Rhodes - he's the master of concrete and a great resource for any questions or tips
- Buddy Rhodes Forum - FAQs from the master
- All Things Concrete - tips on picking a sealer
- Cement.org - more sealer tips, including a handy chart
- Fine Home Building - interview with Fu-Tung Cheng, another concrete guru. It's like 30 pages but it answers so many questions
- Kelly Moore Photography Blog - pretty pictures of her DIY
- Imperfectly Polished - She used the Quikrete countertop mix and went for the grainier/rockier look
- The Natural Handyman - This guy DIY'd his countertop with knockouts for the sink and stove
Tuesday, September 6, 2011
It's our Anniversary! Twice!!!
This week we're celebrating TWO anniversaries! The Apt528 store turned 2 on Sunday and the blog turns 4 on Thursday!! To celebrate, here's a brief history of Apartment 528.
Four years ago, on September 8th, 2007, this blog started under its original name, "A Day in the Life of Design Girl," an online diary for me to share my decorating adventures. Back then, my husband was my boyfriend and we were moving into our first apartment together in Boston. It was my first time having my own apartment and I couldn't have been more excited! We spent months living with a revolving door of furniture as I tried to define my own style. Our apartment changed from a collection of handy-me-down pieces to a place full of thrifty retro treasures, DIY projects, and brightly painted walls.
 |
| Day 1 in our first apartment. Those couches were $25 and not much to look at! |
 |
| A mix of new craigslist pieces and Ikea stuff as we tried to figure out what our style was. |
 |
| Finally getting closer to the retro style we've come to love. |
 |
| Barcodes painted down our blood red hallway. We painted three barcodes but never got around to adding the numbers! |
 |
| I fell through the pebbled glass of the dining room table trying to hang this light but it was worth it! |
Not only did I share my decorating stories and DIY projects, but sprinkled throughout were little "Youz*r tips", named after Youz*d Designs, an interior decorating business I was running at the time for renters on a budget looking for design help. Youz*d (prounounced "used") was a way to help renters "put the 'you' in 'used'." Just because you're living in someone else's house with second hand furnishings shouldn't mean that you can't have a place that's all you!
 |
| From the archives: Pillows from our favorite pillow company, Bonjour Mon Coussins. |
 |
| From the archives: B+N wall tiles |
 |
| From the archives: Eurobad '74. They collect images of the worst design 1974 had to offer! |
 |
| Prints and cards from our first handmade designer, David Paul Seymour |
 |
| Mustache salt and pepper shaker from the now disbanded Paperdoll Woodshop. |
Now, four years from the launch of the blog and two years from the opening of the store, we're still here doling out handmade and vintage goods in the store and sharing design finds on the blog. Things are constantly changing...blame that on my ADD and need for constant change. What's different? Personally, that Boston Boy I moved in with years ago is now my husband and we're happily residing in Chicago. At the store, we have great new designers, we're selling furniture now, plus we have many more surprises coming in the next year. On the blog....well, not much actually. I'm still horrible at writing and can't seem to keep a weekly series going to save my life. The one thing you can always count on from the blog: consistent inconsistency!
 |
| New in the store: messenger bags by Lesia Morehead |
Thursday, September 1, 2011
Time Out, Randolph Street, and a Big Move
Don't hate me! I know last week I was supposed to finish up The Big Move posts, but I got caught up! First off, I had to get our apartment ready for our newest press...a House Call in Time Out Chicago! We're so happy to be featured. Unfortunately, we're still working on the two bedrooms so the pictures are only of the main house, but hopefully we'll have them ready to share soon. The best part of the feature? JUSTIN TIMBERLAKE is on the cover!!! I have a mega crush on Justin and am not ashamed to say that I have a JT marionette doll form his NSync "Bye Bye Bye" days. Just think, one day I could be in the same ROOM as Justin and we could talk about the Time Out piece! For the full article or to see more pictures, click here.
After the House Call, it was time to get ready for the Randolph St. Market. The weather was nice but the sun was burning a hole in our sides, especially when we got caught in the glare off the stainless tanker desk. Lesson learned: always wear sunscreen. I think my face will be peeling for months now and I'm starting to hate the smell of Aloe. Thankfully, I had my mom and sisters in town all weekend to lend an extra hand. Thanks to all who came out and shopped us. We'll see you again at the Vintage Bazaar September 18th.
Now that things have quieted down and we're finally back to normal, I'll be around blogging, starting with this week's weekender featuring the DIY you've all been waiting for...concrete countertops!!
In the meantime, we're so behind on this year's Big Move series that I've decided to just skip it and move forward. Next year I'll be ready, I promise! So instead, take a look at some posts from the past couple of years to help you out with your big move!
Moving? These past posts will help you out!
 |
| Copyright Time Out Chicago |
 |
| Copyright Time Out Chicago |
After the House Call, it was time to get ready for the Randolph St. Market. The weather was nice but the sun was burning a hole in our sides, especially when we got caught in the glare off the stainless tanker desk. Lesson learned: always wear sunscreen. I think my face will be peeling for months now and I'm starting to hate the smell of Aloe. Thankfully, I had my mom and sisters in town all weekend to lend an extra hand. Thanks to all who came out and shopped us. We'll see you again at the Vintage Bazaar September 18th.
Now that things have quieted down and we're finally back to normal, I'll be around blogging, starting with this week's weekender featuring the DIY you've all been waiting for...concrete countertops!!
In the meantime, we're so behind on this year's Big Move series that I've decided to just skip it and move forward. Next year I'll be ready, I promise! So instead, take a look at some posts from the past couple of years to help you out with your big move!
Moving? These past posts will help you out!
- The Big Move 2010 - all the tips you need no matter what stage of moving you're in
- Moving On Out - never lose your security deposit again!
- Time to Get Fixed - break something? They'll help you fix it.
- Got Wood? - get your wood floors and furniture looking like new
- Apartment Security: Get it Done - make sure your new home is secure
- Apartment Security: The Little Things - don't forget these small ways to keep your apartment safe
Subscribe to:
Posts (Atom)